IBM PCIe3 x8 SAS RAID internal adapter 6 Gb Manual page 25

21. Reconnect the front SAS cables to the disk drive backplane. Push the connectors in until the latch
clicks.
Figure 7. Reconnecting the front SAS cables in the disk drive backplane
Notes:
v The short SAS cable connects the upper disk drive backplane connector (J2) to the P2 connector on
the adapter in slot P1-C14. The long SAS cable connects the lower disk drive backplane connector
(J1) to the P1 connector on the adapter in slot P1-C15. See Figure 8.
Base DASD Backplane
(CCIN 2B09)
Figure 8. Reconnecting the SAS cable in a split-disk configuration
v For information about SAS cable part numbers, see 5148-21L, 5148-22L, 8247-21L, 8247-22L,
8284-21A, or 8284-22A system parts (http://www.ibm.com/support/knowledgecenter/POWER8/
p8ecs/p8ecs_83x_8rx_parts.htm).
22. Replace the fan cage with the fans installed. For instructions, see Replacing a fan cage
(http://www.ibm.com/support/knowledgecenter/POWER8/p8haq/
p8haq_83x_8rx_fancagereplace.htm).
Long P2
Storage Controller
Cable
P1
J2
J1 P2
Storage Controller
P1
Short
Cable
(CCIN 57D7)
Slot C15
(CCIN 57D7)
Slot C14
PCIe3 x8 SAS RAID internal adapter 6 Gb
7