Channel Setting - Sony WRT-808A Operating Instructions Manual

Power Supply
Notes on batteries
•
Use new alkaline batteries, and check the recommended
"useby" date on the bottom of the batteries.
•
Do not pair different types of batteries.
•
Always replace the two batteries together.
•
The batteries are not rechargeable.
•
Be careful to install the batteries with the correct polarity.
•
When not using the transmitter for a long period, remove
the batteries to avoid leakage. If the batteries do leak, clean
all leakage from the unit. Leakage left in the unit may cause
poor battery contact. If there seems to be poor battery
contact, consult your Sony dealer.
8

Channel Setting

Caution
Turn off the transmitter when setting the transmitting
channel to eliminate interference or noise on other wireless
equipment.
Each "Wireless Channel" is represented on the unit by a 2-
digit TV channel number followed by another 2-digit
number, for example: 67-05.
Set the channel select switches for the clicked position of
the desired channel number by using a screw driver.
The left switch selects the TV band and the 10's digit of the
transmitting channel. The right switch selects the 1's digit of
the transmitting channel.
2
1
3
66
0
0
67
1 3
2
Set the left switch to "67" side "0".
For the selectable wireless channels and frequencies, see
"Wireless Channel List" on page 5.
Set the right switch to "5" .
5
4
6
4 3 7
4 2 8
1 9
0