Sony WRT-808A Operating Instructions Manual
Uhf synthesized transmitter
Hide thumbs
Also See for WRT-808A:
- Operating instructions manual (40 pages) ,
- Operating instructions manual (13 pages) ,
- Service manual (48 pages)
Related Manuals for Sony WRT-808A
Summary of Contents for Sony WRT-808A
- Page 1 3-866-919-21 (1) Synthesized Transmitter Operating Instructions WRT-808A © 1999 Sony Corporation [AU66]...
-
Page 2: Table Of Contents
Table of Contents Precautions • The unit is designed for use in ambient temperature range Precautions ................. 2 of 0°C to 50°C (32°F to 122°F). Overview ................3 • Do not place the unit on or near heat sources, such as Wireless Channels Selectable ........ -
Page 3: Overview
TV a) For this models, the AN-820A UHF antenna and the WD-820A UHF antenna divider are required. channel number. b) When using the WRT-808A, 98 channels are selectable in frequency band of 792.250-798.250MHz or 799.250-805.250MHz. -
Page 4: Features
WRR-802A/WRR-805A/WRR-850A/WRU- 806A. Easy and reliable connection The WRT-808A can be adapted to a wide variety of wired LED indication of audio input microphone which has a XLR audio connector. The reliable The AF/PEAK indicator allows you to comprehend the connection assures the noise-free operation. -
Page 5: Wireless Channel List
Wireless Channel List Channel Frequency(MHz) Channel Frequency(MHz) Channel Frequency(MHz) Channel Frequency(MHz) 66-01 792.250 66-26 795.375 67-01 799.250 67-26 802.375 66-02 792.375 66-27 795.500 67-02 799.375 67-27 802.500 66-03 792.500 66-28 795.625 67-03 799.500 67-28 802.625 66-04 792.625 66-29 795.750 67-04 799.625 67-29 802.750... -
Page 6: Parts Identification
Parts Identification Microphone POWER/BATT indicator connector AF/PEAK indicator Input LEVEL control Microphone release button Channel select (under side of RF power switches the unit) output switch POWER switch Battery compartment 1 Microphone connector audio frequency level is over the reference level. It lights in Connect to a dynamic microphone which has a XLR type red when the signal reaches the maximum level. -
Page 7: Power Supply
Power Supply The transmitter can operate on two LR6 (size AA) alkaline Turn the battery-compartment screw counterclockwise. batteries continuously for about 4 hours at 25°C (77°F). Match the polarities and insert the batteries. Installing the batteries Close the lid. Battery indication When you turn the power on, the POWER/BATT indicator lights in green. -
Page 8: Channel Setting
If there seems to be poor battery The left switch selects the TV band and the 10’s digit of the contact, consult your Sony dealer. transmitting channel. The right switch selects the 1’s digit of the transmitting channel. -
Page 9: Microphone System Operation
Though the RF input indicator lights on the tuner, the If noise is heard Sony tuner (equipped with muting function) makes neither Depending on the environment where the system is noise nor audio output. - Page 10 Hold By turning the control to “–10”, the WRT-808A provides 50 the microphone itself as shown. dB input attenuation and can be inputted +4 dB (maximum 20 dB) line level signal.
-
Page 11: Use Of The Soft Case
Use of the Soft Case Using the soft case, you can attach the unit to a belt. Attaching the unit to a belt Turning the unit Connecting the unit and your microphone Detaching the belt clip Microphone cable with XLR-3-11 type While pressing down the shoe on the case 1, and XLR-3-12 type connectors pull out the belt clip 2. -
Page 12: Specifications
RF power output 50 mW/10 mW selectable Battery life Approx. 4 hours at 25° C (77° F) Frequency stability Within ±0.005% with Sony LR6 alkaline batteries Tone signal 32.768 kHz Type of emission 110KF3E General Type of antenna Internal, - wave length wire Operating temperature 0°...