Ricoh M C250FWB Setup Manual page 7

Use the Machine from a Smart Device
■ How to use the machine from a
smart device
From smart device applications, you can use the
following functions of the machine:
• Sending scanned images or documents from
the machine to the smart device
• Printing photographs and documents stored on
a smart device
After scanning the following QR code with your
smart device, search for the "RICOH Smart
Device Connector" application and download it
from the site that appears.
Android
Connecting the Machine via Wi-Fi
Easy Setup Using the Wi-Fi Setup Wizard
From the control panel of this machine, you can also configure the
wireless LAN settings for the machine.
● The following item is necessary to set up a wireless
connection.
● Router (access point)
Checking the SSID and Encryption key
The SSID and Encryption key for the router (access point) may be
printed on a label affixed to the router (access point). For details
about the SSID and Encryption key, refer to the router (access point)
manual.
Confirm the SSID and Encryption key, and write them down on the
blank space as shown below.
SSID:
iOS
SSID :XXXXXXXXXXXXX
Encryption key :XXXXXXXXXXXXX
DSG099
Android iOS
■ How to use the NFC (Android
smart devices only)
1. Configure the network connection of
the machine. For details, see page 5
"Connecting the Machine via Wi-Fi".
2. After scanning the following QR code with
your smart device, search for the "RICOH
Smart Device Connector" application and
download it from the site that appears.
3. Start "RICOH Smart Device Connector",
and write the machine's network
information on the NFC using the
application.
4. Perform printing by touching the NFC
from "RICOH Smart Device Connector".
DUE038
Encryption key:
Configuring Settings Using the Control Panel
● Make sure the Ethernet cable is not connected to the
machine.
1. Check that the router (access point) is working correctly.
2. Press [Quick Setup].
For details about [Detailed Setup], see User's Guide.
DUE033
ECC292
5