ShoreTel Ascom IP-DECT Manual page 29

Step Description
9
Navigate to the DECT System frame by clicking DECT and then clicking System. Configure the fields
displayed below and then click OK.
System Name is the Device Name used in Step 3. Password is the Password used in Step 3. The box
below Password is to confirm the password and the value configured for Password field must be
entered here. Subscriptions can be set to "With User AC", "With System AC", or "Disable". In the
sample configuration "With System AC" was used. This enables the system to use the Authentication
Code when challenging DECT handsets during registration. The Authentication Code is a numerical
code that every DECT handset will need to use to subscribe to this system, in our example we set the
access code to "1234". Use the drop-down list for Tones and select "US". Use the drop-down list for
Default Language and select "English". Use the drop-down list for Frequency and select "North
America". By default carriers 0,1,2,3 and 4 will be checked. The Enable Carriers check boxes enable
the DECT handsets to use different channels or frequencies when transmitting. Use the drop-down list
for Coder and select "G711u" and set Frame (ms) to 30.
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 29 -