ShoreTel Ascom IP-DECT Manual page 20

Figure 11 – Individual User SIP Settings
There is no default "SIP Password" it is masked with the appearance that there is, but don't be confused to think
that there's a default password. You can modify it to any value you wish, but be certain to note what you changed it
to, as you will need it when configuring the IP DECT handset parameters.
"Save" your changes.
SIP Profiles
ShoreWare Director's "IP Phones..." section contains a "SIP Profiles" option. ShoreTel 12.1 comes standard with
a "_System" and "_ShorePhoneIP8000" SIP profiles (they cannot be deleted - only disabled). By default, the
Ascom IP DECT handsets utilize the "_System" profile. In order to optimize the functionality, you will need to add
a custom profile. This is accomplished from ShoreWare Director by selecting "Administration" followed by
"IP Phones" then "SIP Profiles" This action brings up the "SIP Profiles" screen. At the top of the page,
below the "SIP Profiles List", select the "New..." radio button, as shown in Figure 12.
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 20 -