ShoreTel Ascom IP-DECT Manual page 13

•
SIP session refresher: The refresher setting decides if user agent client or user agent server
refreshes the session. Again, there is no need to modify the default value of "Caller (UAC)."
This allows the IP DECT handset to be in control of the session timer refresh.
Switch Settings
When allocating Ports for SIP extensions, these changes are modified by selecting
"Administration", "Platform Hardware/Voice Switches/Primary...", then "Primary" in
ShoreWare Director (Figure 4).
Figure 4 – Administration/Switches
This action brings up the "Switches" screen. From the "Switches" screen, simply select the name
of the switch to configure. The "Edit ShoreGear ...Switch" screen will be displayed. Within the
"Edit ShoreGear ...Switch" screen, define one of the "Port Type" settings from the available
ports to "100 SIP Proxy" (Figure 5), then save the change.
Note:
If your installation requires more than 100 SIP extensions configure the "Port Type" as
"100 SIP Proxy" as necessary (i.e. two ports configured for "100 SIP Proxy" will provide 200 SIP
extensions).
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 13 -