ShoreTel Ascom IP-DECT Manual page 17

Table of Contents

Advertisement

Note:
If you choose not to define a "Virtual IP Address," you can only define one proxy switch, and
there is no redundancy or failover capabilities. The switches available in the "Proxy Switch 1 / 2" will
only be shown if proxy resources have been enabled on the switch.
The Admission Control Bandwidth defines the bandwidth available to and from the site. This is
important as SIP endpoints may be counted against the site bandwidth. See the ShoreTel Planning and
Installation Guide for more information about this.
Beginning with ShoreTel 8.1, we now add 11 CODECs by default. These CODECs can be grouped as
"Codec Lists" and defined in the sites page for "Inter-site" and "Intra-site" calls. See ShoreTel's
Administration Guide for more information. The default settings will work properly with the IP DECT
handsets.
Creating SIP Extension
You need to create a user extension for the IP DECT handset. This is accomplished from ShoreWare
Director by selecting "Administration" followed by "Users..." then "Individual Users" This action
will bring up the "Individual Users" screen at the top of the page. To the right of "Add new user at
site:" select the site you wish to create the user in (from the drop down menu), and select "Go" (Figure
9).
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 17 -

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for ShoreTel Ascom IP-DECT

Table of Contents