ShoreTel Ascom IP-DECT Manual page 28

Step Description
8
Navigate to the DECT Master frame by clicking DECT and then clicking Master.
Use the drop-down list for Mode and select "Active". You will see the following display screen telling
you to configure the admin password on the DECT/System page. Click OK. Click on the Reset
required! link and then the following OK button, to rest the system.
Make sure you check the Enable Pari function box. Use the IP-PBX, Protocol drop-down list to set
the protocol to "SIP". The IP-PBX Proxy is set to the IP address of the ShoreGear Switch that you
enabled SIP Proxy ports. The Max. Internal number length should be set to the length of your
internal extension lenght. Checking the Enbloc Dialing box will allow for post dialing. You should
also enable (check) the following parameters: Allow DTMF through RTP, Accept inbound calls not
routed via home proxy and Register with number. We also recommend that you configure
Registration time-to-live to a value of 3600. Click OK when finished.
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
¨
- 28 -