Reset The Stopwatch; Alarms During The Exercise - Acumen Stopwatch Instruction Manual

Reset the Stopwatch

- Press & hold STP/RESET Button
stopwatch stops) will reset the stopwatch to zero. At the same time, your
exercise data will be saved in Recall Data Mode.

Alarms During the Exercise

1. Out of Zone Alarm (Optional)
The watch will beep constantly if your heart rate is above or below the
selected T arget Zone. This is to remind you to speed up or slow down.
- When the stopwatch is running, press & hold STP/RESET Button
activate/deactivate the T arget Zone alarm.
OR
- When the stopwatch is stopped and has already reset to zero, press & hold
STP/RESET Button
2. In-Zone-Goal Countdown Timer Alarm (Optional)
You can set a goal time for being in your Target Zone. This In-Zone-Goal
Countdown Timer is set while in the Recall Data Mode or the Program
Mode. It can be set from 5 to 60 minutes. This value is set by pressing STR
Buttons or STP/RESET Buttons
B
is displayed in the Chrono Mode as the following figure:
C
to activate/deactivate the Target Zone Alarm.
C
. If it is set to ON, the "
C
in the Chrono Mode (when the
to
C
" icon
49