Acumen Stopwatch Instruction Manual page 40

Step 3
Exercise Intensity (blinking)
- Press STR Button
to select HI (High), MED (Median) or LO (Low).
- Press MODE/NXT Button
Step 4
MET Parameter (blinking)
- Press STR Button
to adjust the value. (Refer to page85 to determine
your MET Parameter).
- Press MODE/NXT Button
next item.
Step 5
Drink Interval Timer (blinking)
The watch will remind you to drink during exercise
if the timer is set.
- Press STR Button
to adjust the value (Range: OFF, 1 to 60minutes).
- Press MODE/NXT Button
"Fluid Loss ON" display.
36
or STP/RESET Button
B
to go to Step 5.
D
or STP/RESET Button
B
to proceed to the
D
or STP/RESET Button
B
to back to the
D
C
D
C
D
C
D
B
C
B
C
B
C