Setting The Time - Acumen Stopwatch Instruction Manual

Setting the Time

From the Digital time Display, press & hold SET Button
seconds to enter the Set Mode.
Tips:
1
) There are two arrows on the LCD display to indicate the Adjust Buttons.
2) If no button is pressed for 60 seconds, the watch will automatically exit the
Setting Mode.
3) Press & hold SET Button
Mode.
Step 1
12/24 Hour Time Display Format (blinking)
- Press STR Button
select 12 or 24 hour time.
- Press MODE/NXT Button
item. (If you have selected 24 hour time , go to
step 3.)
Step 2
AM/PM (blinking)
- Press STR Button
select AM or PM.
- Press MODE/NXT Button
item.
24
for 3 seconds at any time will exit the Setting
A
or STP/RESET Button
B
to proceed to the next
D
or STP/RESET Button
B
to proceed to the next
D
A
to
C
D
to
C
D
for 3
B
C
B
C