Setting The Target Zone Alarm - Acumen Stopwatch Instruction Manual

Step 2
(Optional)
Upper Limit (blinking)
- Press STR Button
to adjust the value.
- Press MODE/NXT Button
next item.
Step 3
(Optional)
Lower Limit (blinking)
- Press STR Button
to adjust the value.
- Press MODE/NXT Button
to the Heart Rate Mode.
Note: Press SET Button
Percentage of your Maximum Heart Rate in the Setting Mode.

Setting the Target Zone Alarm

If you set the Target Zone Alarm to ON, the watch will beep when you are
above or below the selected T arget Zone. From the Select TZ Mode, Press
STR Button
B
STP/RESET Button
the " " icon.
From the Select TZ Mode, press MODE/NXT Button
to the Analog Time Display.
or STP/RESET Button
B
to proceed to the
D
or STP/RESET Button
B
to exit and return
D
to toggle the heart rate limit in BPM or
A
to select a desired Target Zone, then press & hold
to set the alarm to ON or OFF . ON is indicated by
C
C
D
C
D
repeatedly to return
D
B
C
B
C
45