HP 9000 300 Series Installation Reference page 61

HP 9000 System Support Log
Introduction
Hello-Let me tell you a few things about this document.
Place this document behind the installation document that came with your system and
keep the binder close to the system it is associated with. Use the spine that came with
this system support logfor the binder title. It contains information that will make your
system more useful and productive with less down time if your system should ever require
service.
This document has information about where and how to obtain service for hardware
and/or software problems. It also contains information about your systems configuration,
options, modifications, and repair/maintenance required. In other words, this is an
historical document that contains information about the system it is prepared for and
no other system.
Certain entries are left for you to make and maintain. Careful and accurate entries will
save you time and frustration if service is required.
A system information page is shipped with the Computer for your system. Its color is blue
and has some white labels affIxed to it. These labels record the model and serial number
for the computer and/or expander, plus it identifies the boards that were installed in the
backplane at the factory. Be sure to enter the HP Maintenance Agreement Numbers on
this page if you have an agreement with Hewlett-Packard. Place this page in the LOG
book in front of the blue Peripheral page at the front of the Installation section.
The Peripheral page has spaces for you to enter some important information. Record
the model number and serial number for each:
• Monitor
• Disc drive
• Graphics Hardware
And other Accessories that make up your system.
HP 9000 Support Log 1