Replacing The Fuse - HP 9000 300 Series Installation Reference

Replacing the Fuse
New fuses are available at Hewlett-Packard Sales and Service Centers.
1.
Turn off the computer's power witch.
2. nplug the power cord from the outlet and then unplug it from the power socket
on the computer.
3. The fuse is located just beside the power cord.
Fuse Location
4. Open the fuse cover by turning it counter-clockwise with a screwdriver.
5. Remove the fuse cover. It should contain a 250V, 8A fuse. Remove the fuse.
6. Install the replacement fuse that was shipped with your computer into the fuse
cover, and slide the cover into the computer.
7. Close the cover by turning it clockwise with a screwdriver.
8. Plug the power cord into the computer's power socket and into the power outlet.
9. Press in the power switch on the computer.
34 Reference