System Connection - Sony MVS-8000X-C Installation Manual

1-9.

System Connection

Confi gure the MVS-8000X series system connections referring to the connection example as shown below.
1. Connection example of the MVS-8000X system
n
The following connection can also be made for the MVS-7000X system.
Cable with BNC-type
connectors
Cross cable
MVS-8000X Multi Format Switcher
a)
Processor
a) The illustration represents the MVS-8000X.
b) It is recommended that the CTRL and DATA LAN networks be
configured by connecting separate Ethernet switches for each
LAN.
c) Terminate with the supplied 75Ω terminators.
d) This figure shows the rear panel when one MKE-8021A is
installed in the MVE-8000A.
1-46
VTR
Reference video
c)
signal
b)
Ethernet switch Ethernet switch
DDR
MKS-8700 Device Control
Unit Pack
BKS-R Series
IXS Series
MKS-8010B System
Control Unit
Reference video
c)
signal
BVE-9100 Editing Control
System
b)
e) The following cannot be used for connection to the MVS-8000X/
MVS-7000X.
Model Relevant serial numbers
MKS-8010 All
MKS-8010A 10001 to 11196
MKS-9011A 10001 to 12000
MKS-9012A 10001 to 21000
Audio Mixer
Reference video
c)
signal
e)
c)
Reference video signal
MVE-8000A-C DME
Processor Pack d)
MVS-8000X/7000X