Sony MVS-8000X-C Installation Manual page 50

D308 (J-1) : +3.3 V
+3.3 V power supply status indication.
Lights when the +3.3 V power is supplied.
D407 (J-1) : +1.2 V
+1.2 V power supply status indication.
Lights when the +1.2 V power is supplied.
D402 (J-1) : +1.0V-AVCC1
+1.0 V analog power supply status indication.
Lights when the +1.0 V power is supplied.
D403, D405 (J-1) : +1.2V-APLL1, +1.2V-AVT1
+1.2 V analog power supply status indication.
Lights when the +1.2 V power is supplied.
D501 (K-2) : CC_UNLOCK
Indicates lock/unlock of the clock conditioner.
If this LED lit, the clock conditioner can possibly be
unlocked.
D701 (J-1) : CAD1
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA can possibly be working incor-
rectly.
D702 to D717 (N-1) : CPU status
CPU on the board status indication.
D718 (C-1) : STATUS
For future expansion.
D720 (K-1) : PLL UNLOCK
Indicates lock/unlock of the PLL (Phase Locked Loop) in
the FPGA.
If this LED lit, the PLL can possibly be unlocked.
D721 (A-1) : BECON
For future expansion.
D901 (A-1) : INET SWER LINK
Lights when Ethernet 1 on CPU module links with CA
board.
D902 (L-1) : INET SWER ACT
Ethernet 1 on CPU module links with CA board and blinks
when data send or receive is in progress.
1-44
D903 (L-1) : INET DME LINK
For test LED.
D904 (L-1) : INET DME ACT
For test LED.
D1509 (J-1) : CAD2
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC21) can possibly be working
incorrectly.
D1510 (K-1) : CONF ERR
Indicates the confi guration error of the FPGA.
If this LED lit, any FPGA can possibly be working incor-
rectly.
D1502 (J-1) : SDI1
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC5) can possibly be working
incorrectly.
D1501 (J-1) : SDI2
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC6) can possibly be working
incorrectly.
D1503 (J-1) : PVMX
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC11) can possibly be working
incorrectly.
D1506 (K-1) : FINTP1
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC7) can possibly be working
incorrectly.
D1507 (K-1) : FINTP2
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC8) can possibly be working
incorrectly.
D1504 (K-1) : AINTP1
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC9) can possibly be working
incorrectly.
D1505 (K-1) : AINTP2
Indicates the confi guration error of the FPGA.
If this LED lit, the FPGA (IC10) can possibly be working
incorrectly.
MVS-8000X/7000X