Reversing the direction the door opens
The doors normally open to the left (hinges on the right); if you wish to open the door to the right,
you can modify the direction in which it opens by following the instructions below. To ensure cor-
rect installation, please scrupulously follow the directions and the sequence of operations below:
1.
Gently tilt the appliance backwards.
2.
Remove the plinth by pulling the lugs A on the
lower part towards you and swivelling the
plinth upwards to disengage it (Drawing R1).
Remove cover B from its housing on the left
and insert it in the housing on the right
(Drawing R2).
3.
Remove the bottom hinge pin and release it
from its housing C; retrieve the plastic
distance piece placed between the door and
the hinge on the pin; unscrew the bottom
hinge D and screw the pin into the left-hand
hole in the hinge (Drawing R3).
4.
Remove
the
(Drawing R3).
5.
** Unscrew the metal spacer Y (Drawing R3)
located on the bottom right-hand side.
6.
** Turn the spacer Y over (Drawing R3) and
screw it onto the bottom left-hand side.
7.
** Remove the plastic pin F from the top
left hinge (Drawing R4).
8.
Remove the spacer and the pin E from the top
hinge and remove it from its housing on
the tight-hand side (Drawing R4).
9.
Turn the pin E over 180° and insert it into
the right-hand opening on the top hinge
(Drawing R4).
10. ** Screw the plastic pin F back into the top
right hinge (Drawing R4).
11. Insert the appliance's door into the top hinge
on the left-hand side (Drawing R4).
12. Insert the bottom hinge D in the door, ensur-
ing that the plastic spacers are correctly insert-
ed over the pins.
13. Screw the bottom hinge D in place.
14. Re-attach the plinth and return the appliance
to a vertical position.
(** Points 5,6,7 and 10 apply only to certain models)
Wait two hours before restarting your
appliance.
door
from
the
appliance
31
Drawing R1
A
A
A
Drawing R2
B
Drawing R3
D
C
Dessin R4
Drawing R4
F
E
D
EN
A
Y
F
E