Storage Location Groups - Siemens SIMATIC PCS 7 System Manual

Storage management

6.2 Storage location groups

6.2 Storage location groups
With the help of the APF engineering tool, you can define up to 30 storage location groups.
The storage location groups are saved in the "FB_STORGROUP" user archive.
The storage location groups are displayed in a selection list in the process picture.
Creating storage location groups
To create a storage location group, follow these steps:
1. Open the storage location management in the navigation area of the APF engineering tool.
2. Select the "Storage location groups" group.
All defined storage location groups are displayed in the working area.
3. Enter the numbers of the function blocks to be generated in the "FB Number (R)" and "FB
Number (I)" fields.
Note
Block numbers FB1775-1795 are reserved for APF blocks and must not be overwritten.
78
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA