Siemens SIMATIC PCS 7 System Manual page 92

Storage management
6.8 Storage trigger
Configuring a trigger
To configure a trigger with the APF engineering tool, follow these steps:
1. Select the "Storage trigger" group in the navigation area of the APF engineering tool.
The storage triggers are displayed in the working area.
2. Click the "Edit" button in the row of the required trigger.
The "Edit trigger" dialog opens.
3. Configure the following properties of the trigger:
92
Area/check box
Name
Cycle
Enabled
Cycle time
Name of the trigger (non-editable)
Intervals for executing the actions in runtime:
Standard cycle
Hourly
Daily
Weekly
Monthly
Annually
Activation of the trigger
Timing for executing the trigger (depending on the cycle setting)
Advanced Process Functions Engineering Manual
Explanation
System Manual, 07/2016, A5E38719921-AA