Siemens SIMATIC PCS 7 System Manual page 47

The "Storage management" tab consists of the following areas:
● Archive names
This area shows the pre-assigned user archives in which the storage management data
are saved.
The names of the user archives are pre-assigned and cannot be edited.
● Display of each first alarm logging ID for
– Storage location messages
– Error messages
● Assign IDs automatically
You can use this check box to specify whether the IDs for storage locations are assigned
manually or automatically when new storage location data records are created.
● Material class releases
In this area you can see the quantity (0-4) of material class releases.
● Material type releases
In this area you can see the number of material type releases.
● Monitoring time
In this field you can enter the monitoring time in increments of 2 seconds. The monitoring
time is started in the process picture via the "Actual values" button. If positive feedback
from all affected "FB_SACT" blocks does not arrive within this monitoring time, the user is
notified that not all displayed storage locations could be updated.
● Tags
In this area you can enter the tags of the "FB_SACT" blocks for each automation system.
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA
Area
Group archive
Actual value archive
Attribute archive
Storage location archive
Storage location status ar‐
chive
Procedure archive
Note
For information on importing APF messages in Alarm Logging, refer to "Advanced
Process Functions (APF) Installation and Configuration".
User archive
FB_STORGROUP
FB_STORVALUE
FB_STORATTRIB
FB_STORAGE
FB_STOR_ST_STATUS
FB_PROCEDURES
APF Engineering Tool
4.4 "Settings" dialog
Explanation
Definition of the storage location groups
Definition of the actual storage location
values
Definition of the storage location param‐
eters
Archiving of the storage locations
Definition of storage location status texts
Definition of the procedure releases
47