Configuring The "Fb_Ua_Wm" Function Block - Siemens SIMATIC PCS 7 System Manual

Configuring AS-OS communication
3.3 User Archive Write Manager
3.3.2

Configuring the "FB_UA_WM" function block

To configure the "FB_UA_WM" function block, follow these steps:
1. Create a new hierarchy folder in the PH.
2. Create a new CFC in the hierarchy folder, and open it in the CFC Editor.
3. Insert the "FB_UA_WM" function block from the master data library into the CFC.
Note
An "FB_UA_WM" block OB should run in a faster OB than the requesting blocks.
4. Rename the function block "UA_WM".
Note
The name "UA_WM" is specified by the APF system and must not be changed here or in
subsequent configuring steps. If you want to use several "FB_UA_WM" function blocks,
you must configure them in different CFCs.
20
FB_UA_WM
OS
Advanced Process Functions Engineering Manual
System Manual, 07/2016, A5E38719921-AA