At+Cftpstype Set The Transfer Type On Ftp(S) Server - SimCom SIM7500 Series At Command Manual

AT+CFTPSPWD Get the current directory on FTP(S) server
Execute Command
AT+CFTPSPWD
Defined Values
<dir>
<errcode>

2.10 AT+CFTPSTYPE Set the transfer type on FTP(S) server

This command is used to set the transfer type on FTP(S) server, please make sure you have login to FTP(S) server
before AT+CFTPSTYPE.
AT+CFTPSTYPE Set the transfer type on FTPS server
Test Command
AT+CFTPSTYPE=?
Read Command
AT+CFTPSTYPE?
Write Command
AT+CFTPSTYPE=<type>
Defined Values
<type>
SIM7500_SIM7600_SIM7800 Series_FTPS_AT Command Manual
Response
a)if get the current directory successfully:
+CFTPSPWD: "<dir>"
OK
b)if failed:
+ CFTPSPWD: <errcode>
ERROR
c)if parameter format or any other error occurs:
ERROR
The name of the file to be deleted. If the file name contains
non-ASCII characters, the <filename> parameter should contain
a prefix of {non-ascii}.String type, the maximum length is 256.
The result of change current directory, 0 is success, others are
failure, please refer to chapter 4
Response
+CFTPSTYPE: (A,I)
OK
Response
+CFTPSTYPE: <type>
OK
Response
a)if set type successfully:
OK
+CFTPSTYPE:0
b)if set type failed:
OK
+CFTPSTYPE:<errcode>
c)if parameter format or any other errors:
ERROR
The type of transferring:
Smart Machine Smart Decision
10 / 29