At+Cftpscwd Change The Current Directory On Ftp(S) Server; At+Cftpspwd Get The Current Directory On Ftp(S) Server - SimCom SIM7500 Series At Command Manual

Defined Values
<filename>
<errcode>

2.8 AT+CFTPSCWD Change the current directory on FTP(S) server

You can use this command to change the current directory on FTP(S) sever. Make sure you have login to FTP(S)
server successfully before AT+CFTPSCWD
AT+CFTPSCWD Change the current directory on FTP(S) server
Test Command
AT+CFTPSCWD=?
Execute Command
AT+CFTPSCWD="<dir>"
Defined Values
<dir>
<errcode>

2.9 AT+CFTPSPWD Get the current directory on FTP(S) server

This command is used to get the current directory on FTPS server. Before AT+CFTPSPWD, please make sure you
have login to FTP(S) server successfully
SIM7500_SIM7600_SIM7800 Series_FTPS_AT Command Manual
The name of the file to be deleted. If the file name contains
non-ASCII characters, the <filename> parameter should contain a
prefix of {non-ascii}.String type, the maximum length is 256
The result of delete a file, 0 is success, others are failure, please
refer to chapter 4.
Response
+CFTPSCWD: "DIR"
OK
Response
a) change current directory successfully:
OK
+CFTPSCWD: 0
b) if failed:
OK
+ CFTPSCWD: <errcode>
c)if parameter format or any other error occurs:
ERROR
The directory to be changed. If the directory contains
non-ASCII characters, the <dir> parameter should contain a
prefix of {non-ascii}.String type, the maximum length is 256.
The result of change the current directory, 0 is success, others
are failure, please refer to chapter 4
Smart Machine Smart Decision
9 / 29