Axis 2N Indoor Touch 2.0 User Manual page 95

Tip
Press and hold the lock button to display the lock list (locks 1–4) to
control all the locks (not only the default one).
Click the name of the
to set up a call with the device immediately. During the call, the
microphone on the application side is muted so that the visitor cannot
hear you. This mode is suitable for remote silent monitoring of the space
in front of the door. This mode is only available to the
Standard calls can only be made to other applications or the 2N
IndoorTouch
Caution
It is impossible to send the DTMF code from the application outside a
call for technical reasons. Therefore, if you press the lock outside a call in
the SIP Proxy mode, a call is set up first during which the DTMF is sent
automatically.
If the 2N
the incoming call is always identified as a LAN call even if it goes via a
SIP Proxy server. If you require SIP Proxy identification and the
application and
different
Earlymedia is always enabled for the My2N mode. This means that the
calling door unit video is displayed by the application during ringing.
2N TELEKOMUNIKACE a.s., www.2n.cz
2N IP intercom
devices.
IP intercom and the application are in one and the same LAN,
2N IP intercom
Access Key password in the application.
added using Phonebook via My2N
share one and the same LAN, set a
2N IP intercoms .
®
95/135