Wireless & Networks - Axis 2N Indoor Touch 2.0 User Manual

3.3.2.2 Wireless & Networks
This section helps you set the network connection parameters. Connection can be set
via the Ethernet or Wi-Fi (depending on the Part No., refer to Subs. 1.2 Differences
between Models and Associated Products
Wi-Fi – disable/enable the Wi-Fi connection.
Ethernet – disable/enable the Ethernet connection.
Note
Ethernet connection cannot be used together with Wi-Fi.
By disabling the Ethernet connection you do not switch off the device
when PoE is used.
The Wi-Fi section displays the list of available Wi-Fi networks.
2N TELEKOMUNIKACE a.s., www.2n.cz
).
49/135