Axis 2N Indoor Touch 2.0 User Manual page 67

EXTERNAL RINGING
External ringing notification
application will close the given output at an incoming call. OFF is set by default.
Inverted relay output
detection and application response. With ON, the application does not start
ringing until the fall time is detected whenever the button is released. With OFF,
the ringing starts when the rise time is detected the moment the button is
pressed.
Used input – display the input to which the door button is connected.
M inimum ringing time
Maximum ringing time
Bypass DND mode
2N TELEKOMUNIKACE a.s., www.2n.cz
– enable the relay activation. If enabled, the
– ON/OFF (ON by default). Define the pulse rise/fall time
– set the lower ringing limit when the relay is closed.
– set the upper ringing limit when the relay is closed.
– make the application ring via DND if ON is set.
67/135