Device Upgrade - Axis 2N Indoor Touch 2.0 User Manual

3.4 Device Upgrade

There are two ways how to upgrade
the device web interface. The firmware package always includes the current Android
version, Launcher and
SD card upgrade procedure:
Download the latest 2N
1.
cz .
Get a microSD card of the maximum capacity of 16 GB and with the FAT32 file
2.
system.
Copy the downloaded *.ZIP firmware into the root directory of an attached SD
3.
card (naming the file
Insert the SD card in the SD card slot on the left side of 2N
4.
(refer to 2.1 Before You Start
Reset the device as follows:
5.
Press the backside Reset button shortly (refer to
a.
Press the Restart button in the System / Data Backup and Recovery
b.
configuration section.
®
If 2N Indoor Touch 2.0
6.
automatically. If not, an error message is displayed.
Remove the SD card after the upgrade is complete and choose one of the
7.
following options:
Click the display to restart the system.
a.
Hold your finger on the screen for 5 seconds to reset the factory values.
b.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N
®
2N IP Mobile application.
®
Indoor Touch 2.0 Full Upgrade firmware from
upgrade.zip ).
).
detects the right file, the upgrade process will run
Indoor Touch 2.0 : using an SD card or via
2.1 Before You Start
www.2n.
®
Indoor Touch 2.0
), or
69/135