Device Configuration - Axis 2N Indoor Touch 2.0 User Manual

3.3 Device Configuration

Click the Settings button on the introductory page to access the configuration section.
Complete the correct access password.
Caution
The factory access password is "2n". If you lose the access data, you will
have to factory reset the device! Change the password in the Settings /
Personal / Language & input.
Administrator mode – configure advanced functions.
The device configuration consists of five sections: Device, Wireless & Networks, 2N® IP
Mobile, Personal, System; each section is divided into subsections, see below.
3.3.1 User Settings
3.3.2 Administrator Settings
3.3.3 Intercoms
2N TELEKOMUNIKACE a.s., www.2n.cz 28/135