General Settings - Axis 2N Indoor Touch 2.0 User Manual

3.3.3.1 General Settings

This section helps you set the Intercoms general parameters.
GENERAL
Device Name
LAN devices.
Password – set the application setting password via link click from the
application.
Access Key – set the
Tip
Refer to faq.2n.cz for the
Autosnapshot
video preview. The image replaces the circle avatar at the added devices in the
Device and Call Log menus.
Push to Talk
communication: ON/OFF (ON by default).
Logging – enable/disable application logging to the system log.
Multicast Discovery
sends the info packets to the network in the multicast mode. With OFF, 2N
Indoor Touch 2.0
intercom to be monitored and periodically to all the 2N IP intercoms included in
2N TELEKOMUNIKACE a.s., www.2n.cz
– set the device name for
2N IP intercom
Access key
– enable/disable
– select the communication type for one-directional half-duplex
– ON/OFF (ON by default). With ON,
sends the info packets in unicast to the IP address of the 2N IP
®
2N IP Mobile
authentication password.
instructions for use.
Autosnapshot to acquire an image from the
identification to other
®
2N Indoor Touch 2.0
55/135
®