Input And Output - Axis 2N Indoor Touch 2.0 User Manual

3.3.3.6 Input and Output

This section helps you set the input/output parameters.
DOOR BUTTON
Door button – enable/disable the function.
Inverted input mode
and application response. With ON, the application does not start ringing until
the fall time is detected whenever the button is released. With OFF, the ringing
starts when the rise time is detected the moment the button is pressed.
Used input – display the input to which the door button is connected.
Minimum ringing time
Maximum ringing time
Door ringtone
Bypass DND mode
2N TELEKOMUNIKACE a.s., www.2n.cz
– ON by default. Define the pulse rise/fall time detection
– set the lower ringing limit after the button is pressed.
– set the upper ringing limit after the button is pressed.
– select the default user ringing.
– make the application ring via DND if ON is set.
66/135