Problem Solving - Atlas Copco GA 160 VSD Instruction Book

Instruction book
10

Problem solving

10.1 Problem solving
Warning
Control panel
Faults and remedies
A service message appears on the display
Stop the compressor and carry out the indicated service actions.
Reset the message, see Section Service menu.
A shut-down warning message appears on the display
The alarm LED will light up indicating that the temperature at the outlet of the compressor elements is too
high. The message disappears as soon as the cause of the problem is remedied.
APF192090
Before carrying out any maintenance, repair work or adjustment, stop the compressor,
press the emergency stop button and switch off the voltage. Close the air outlet valve and
open the manual condensate drain valves.
Open and lock the isolating switch.
The operator must apply all relevant
Control panel of MkIV regulator
Safety precautions.
101