1-4. Removal of Cabinet
1-4. Removal of Cabinet
Right side panel
To remove the right side panel, loosen the four screws.
Left side panel
1. Loosen the four screws, and pull out the left side panel from the main unit.
2. Remove the connectors (CN7, CN8, CN301, CN304) of the SDI-30 board, and remove the left side
panel.
n
When installing, connect each connector (CN7, CN8, CN301, CN304) properly as shown in the figure
below.
Top panel
Remove the six screws (B3 x 8, B3 x 6) and the two fixing posts, and disconnect the connector as shown
below.
B4 x 12
Right side panel
B4 x 12
CN8
1-10 (E)
B3 x 8
B3 x 6
B3 x 8
CN7
SDI-30 board
Fixing posts
Top panel
Connector
CN304
SERIAL OUT
CN301
SERIAL IN
Left side panel
B4 x 12
B4 x 12
CA-950/950P IMM