Sony CA-950 Installation And Maintenance Manual page 20

1-5. Internal Switches Setting
Ref. No. Switch name
S269 RTS1
S389 RTS2
S406-1 PGM1 TO
TRACKER
S406-2 PGM2 TO
TRACKER
S406-3 INCOM2 R TO
TRACKER (for AU-273)
PROD R TO
TRACKER (for AU-273P)
S406-4 INCOM2 T TO
TRACKER (for AU-273)
PROD T TO
TRACKER (for AU-273P)
S555 TRACKER (T) 0/_20
S580-1 * TRACKER TO
INCOM1 R
S580-2 * TRACKER TO
INCOM2 R
S580-3 TRACKER TO
INCOM1 T
S580-4 TRACKER TO
INCOM2 T
S601 INCOM1
CM/DYM (Panel)
S701 INCOM2
CM/DYM (Panel)
S624 GAIN (Panel)
S724 GAIN (Panel)
* : Only used for AU-273. For AU-273P, always set to OFF.
1-16 (E)
Description
Sets when connecting RTS kit to INCOM1 connector.
RTS: Can use RTS CH1 as INCOM1 connector
NORM: Normal mode
Sets when connecting RTS kit to INCOM2 connector.
RTS: Can use RTS CH2 as INCOM2 connector
NORM: Normal mode
ON: Mixes PGM1 to TRACKER.
OFF: Does not mix.
ON: Mixes PGM2 to TRACKER.
OFF: Does not mix.
ON: Mixes INCOM2 RECEIVE to TRACKER.
OFF: Does not mix.
ON: Mixes PROD RECEIVE to TRACKER.
OFF: Does not mix.
ON: Mixes INCOM2 TALK to TRACKER.
OFF: Does not mix.
ON: Mixes PROD TALK to TRACKER.
OFF: Does not mix.
Selects TRACKER TALK level of TRACKER connector.
0: 0 dBu (Standard)
_20: _20dBu (Use this when input level is low.)
(0 dBu = 0.775 Vrms)
ON: Mixes TRACKER to INCOM1 RECEIVE.
OFF: Does not mix.
ON: Mixes TRACKER to INCOM2 RECEIVE.
OFF: Does not mix.
ON: Mixes TRACKER to INCOM1 TALK.
OFF: Does not mix.
ON: Mixes TRACKER to INCOM2 TALK.
OFF: Does not mix.
Refer to the operation manual.
Refer to the operation manual.
Refer to the operation manual.
Refer to the operation manual.
Factory setting
NORM
NORM
ON
OFF
OFF
ON
OFF
ON
0 (0 dBu)
ON (for AU-273)
OFF (for AU-273P)
OFF
ON
ON
CM (Carbon)
CM (Carbon)
0 (0 dB)
0 (0 dB)
CA-950/950P IMM