ioSafe Duo Quick Start Manual

Fireproof and waterproof raid storage device
Hide thumbs Also See for Duo:

Advertisement

Quick Links

ioSafe
Duo
®
Fireproof and Waterproof RAID Storage Device
Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for ioSafe Duo

  • Page 1 ® Fireproof and Waterproof RAID Storage Device Quick Start Guide...
  • Page 2: Table Of Contents

    1.1 Package Contents ....... . 3 1.2 ioSafe Duo at a Glance ......4 1.3 LED Behavior .
  • Page 3: General Information

    Duo Quick Start Guide 1 General Information 1.1 Package Contents Check the package contents to verify that you have received the items below. Please contact ioSafe if any items are missing or damaged. 1x** *Only included with unpopulated units **Power cable is localized to the region you purchased your product for, whether North America, European Union/United Kingdom, or Australia.
  • Page 4: Iosafe Duo At A Glance

    Duo Quick Start Guide 1.2 ioSafe Duo at a Glance Front USB Type-C Peripheral Port Power Button Drive Status Type-A Indictators Peripheral Port Rear System Fan Kensington® Lock Slot Power Connector RAID Configuration Jumper Pin Cover Type-C Port...
  • Page 5: Led Behavior

    Duo and protects you against the loss of a single drive. If you purchased an ioSafe Duo with pre-installed drives, no additional steps are necessary to use it in this mode. The Duo works as a RAID 1 device right out of the box. •...
  • Page 6 The ioSafe Duo supports SATA drives of various specifications and different capacities. However, we recommend using drives of the same brand and type for optimal performance that have been qualified by ioSafe. To view a list of qualified drives, please visit iosafe.com. •...
  • Page 7: Connecting The Iosafe Duo

    Duo Quick Start Guide 2 Connecting the ioSafe Duo The cable supplied with your system has been optimized for performance. Longer cables may not work or only work intermittently.
  • Page 8: Drive Installation And Raid Configuration

    If you purchased an ioSafe Duo with drives pre-installed, it comes pre-configured as a RAID 1 device, which invisibly provides you an exact copy of all data stored on the Duo and protects you against the loss of a single drive. No additional configuration is necessary.
  • Page 9: Disaster Support

    Duo Quick Start Guide Disaster Support US Toll Free Phone: 888.98.IOSAFE (984.6723) x430 International Phone: 530. 820.3090 x430 Email: disastersupport@iosafe.com 6 Technical Specifications Product Model ioSafe Duo Fire Protection Up to 1550° F, 30 minutes per ASTM E-119 Water Protection...
  • Page 10 Duo Quick Start Guide Environmental Line voltage: 100V to 240V AC Requirements Frequency: 50/60Hz, Single Phase Product Weight Unpopulated: 23.8 pounds (10.80 kg) Populated: 25.8-26.8 pounds (11.70-12.16 kg) (depending on drive model) Product Dimensions 5.9in W x 11.5in L x 9.06in H (150mm W x 292mm L x 230mm H)
  • Page 11 Duo Quick Start Guide THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 12 ™ ©2019 CRU Data Security Group, ALL RIGHTS RESERVED. CRU , ioSafe , Protecting Your Data™, and No-Hassle are trademarks of CRU ® ® Data Security Group (“CDSG”) and are protected by trademark law. Kensington® is a registered trademark of Kensington Computer Products Group.

Table of Contents