Technical Data Installation Wiring Diagram Starting Exploded View ETF 300 Working Range Spare Part List ETF 300 Discard the Unit Exploded View ETF 550 Transport Instructions Spare Part List ETF 550 Always keep these operating instructions near or on the unit!
The ambient air is heated to absorb humidity and to be carried off to the outside. However, the total gen- erated energy is lost with the carried off humid air. The Use of REMKO Air Dehumidifiers 2. By dehumidifying: The humid air in the closed room is continuously de- ◊...
Page 5
◊ The air enriched with water vapour is continuously cir- thereby contributes to room heating. culating through the REMKO air dehumidifier. It is de- When materials or rooms are to be dried the heat en- humidified and leaves the apparatus in a slightly ergy flows in a circulation, i.e.
Safety Instructions Unit Description REMKO dehumidifiers will provide you with high utility These unit have been designed for automatic, universal and long life thanks to our extensive material, function and problem-free air dehumidification. and quality controls. Thanks to their compact dimensions they can be easily Dangers may arise nevertheless if the unit is used by transported and installed.
Page 7
The condensate tank is equipped with a hose nipple. Af- REMKO air dehumidifiers operate very economically. ter you have removed the filler cap you can connect a Depending on the room temperature and the air humid- standard water hose (is not included in our delivery).
◊ The lock cover in front of the condensate tank have to be closed correctly (tender spot). Operation with Hygrostat The REMKO hygrostat (accessory) is supplied with a special intermediate plug. 1. Insert intermediate plug into a properly protected plug socket.
Working Range Maintenance and Service Dehumidification performance depends exclusively Regular care and the observation of a number of basic upon the design of the room, the room temperature, the rules will ensure the dehumidifier’s long life and reliable relative humidity and the correct observance of the operation.
In Case of Troubles Condenser and Evaporator Cleaning Dismount the casing of the unit before cleaning up the This unit has been designed based on state of the art condenser and evaporator. The following maintenance manufacturing methods and it has been tested repeat- have to be carried out only by an especially authorised edly as to its perfect function.
Any claims under guarantee regarding materials can be accepted only when the orderer or his customer has filled in completely the “guarantee certificate” which is enclosed with every REMKO-device and has returned it to REMKO GmbH & Co. KG in due time after the unit’s sale and commissioning.
Spare Part List ETF 300 Designation Ref.-No. air suction grille 1104487 dust filter 1104486 housing 1104551 side plate, right 1104552 transport strap 1104553 control lamp, yellow 1105512 control lamp, green 1105514 main switch 1102248 heat-exchanger-package, cpl. 1104464 fan blade 1104465 clutch plate 1108014 fan motor...
Spare Part List ETF 550 Designation Ref.-No. air suction grille 1104501 dust filter 1104500 housing 1104502 side plate, right 1104503 transport strap 1104504 control lamp, yellow 1105512 control lamp, green 1105514 main switch 1102248 heat-exchanger-package, cpl. 1104505 fan blade 1104506...
Page 16
REMKO GmbH & Co. KG Klima- und Wärmetechnik D-32791 Lage Im Seelenkamp 12 • D-32777 Lage PO Box 1827 • Phone +49 (5232) 606 - 0 Fax +49 (5232) 606260...
Need help?
Do you have a question about the ETF 550 and is the answer not in the manual?
Questions and answers