Table of Contents
Related Manuals for REMKO ETF 360
Summary of Contents for REMKO ETF 360
- Page 1 REMKO ETF 360/ETF 460 Mobile dehumidifiers Operation · Technology · Spare parts Edition GB – N01...
-
Page 3: Table Of Contents
Contents Air dehumidification Safety notes Unit description Set-up 8-11 Commissioning Shutdown Unit transport Care and maintenance 12-13 Troubleshooting 13-14 Electrical wiring diagram Intended use Customer service and guarantee Environmental protection and recycling Exploded view of the unit Spare parts list Maintenance protocol Technical data Carefully read this operating manual prior to commissioning/using... -
Page 4: Air Dehumidification
REMKO ETF 360/460 ir dehumidif ication The correlations occurring when With regard to energy air is dehumidified are based on consumption, air dehumidification physical laws. has one distinct advantage: These are depicted here in graphical form in order to provide... - Page 5 REMKO air dehumidifier. and so relative humidity increases. If the temperature continues to such as brick 90-190 l/m³, heavy The air is dehumidified and, concrete 140-190 l/m³...
-
Page 6: Safety Notes
REMKO ETF 360/460 The amount of energy from Condensation heat and released for condensation. evaporation heat and condensation When dehumidifying fed air, heat is the same. a larger contribution of heat is The Energy transferred to the air For water, this is:... -
Page 7: Unit Description
The units are used in all locations, humidity level. required. where dry air is a must and where economic consequential damage Schematic depiction of the workings of the REMKO air dehumidifier (such as that caused by mould) must be prevented. Dehumidified room air... -
Page 8: Set-Up
If the units work in continuous ■ operation with an external Schematic depiction of how to set up the REMKO air dehumidifier condensate drainage connection, refer to the relevant section on page 11 nOTE... - Page 9 Electrical wiring Control panel Adjusting the humidity level The units are operated with All rotary knobs and the The unit’s dehumidification power ■ 230 V 50 Hz alternating current corresponding indicator lights are is entirely dependent on the located on the control panel. conditions inside the room, the The electrical room temperature, the relative...
- Page 10 REMKO ETF 360/460 Activating the timer Automatic defrost system Emptying the condensate container You can use the timer function The moisture contained in the Depending on the amount of to preselect automatic unit “ON/ room air condenses when cooling condensate, the integrated OFF”...
-
Page 11: Shutdown
Shutdown Continuous unit operation Continuous unit operation via Press the power key []. with external condensate the internal condensate pump -All displays and device functions outlet are now switched off- For applications in locations The units are equipped with without a drain, the devices are a condensate connection nozzle on fitted with a condensate pump If the units are... -
Page 12: Unit Transport
REMKO ETF 360/460 unit transport Care and maintenance The units are equipped with four Cleaning the condenser and nOTE transport rollers and additional evaporator Regular care and maintenance recessed grips for easy and is fundamental to a long convenient transport. -
Page 13: Troubleshooting
Troubleshooting Filter cleaning The units are manufactured using state-of-the-art production To prevent damage to the unit, it is 5. Clean the air filter [F] with a soft methods and tested several times equipped with an intake grill with brush or a vacuum cleaner. to verify their correct function. -
Page 14: Electrical Wiring Diagram
REMKO ETF 360/460 The unit runs but condensate The unit is loud or condensate is not formed runs out CAuTiOn Check the hygrostat’s setting Check whether the unit is on ■ ■ Work on the refrigerant The set value must be lower... -
Page 15: Intended Use
The units must not be used for any and return the “Certificate of material, please consider our other purpose. guarantee” to REMKO GmbH & environment. Co. KG at the time when the units Our units are carefully packed The units are only permitted are purchased and commissioned. -
Page 16: Exploded View Of The Unit
REMKO ETF 360/460 Exploded view of the unit We reserve the right to modify the dimensions and design as part of the ongoing technical development process. -
Page 17: Spare Parts List
Spare parts list Designation ETF 360 ETF 460 EDP: EDP: Base plate 1111738 1111738 Conveyor rollers 1111851 1111851 Compressor, cpl. 1111852 1111853 Mains cable with plug 1111854 1111854 Connection adapter (for condensate pump operation) 1111855 1111855 Condensate hose, linear m. (for condensate pump operation) -
Page 18: Maintenance Protocol
REMKO ETF 360/460 ✍ Maintenance protocol Unit type: ........Unit number: ........10 11 12 13 14 15 16 17 18 19 20 Unit cleaned - outside - Unit cleaned - inside - Fan wheel cleaned Fan housing cleaned Condenser fins cleaned... -
Page 19: Technical Data
Technical data Series ETF 360 ETF 460 Operating range, temperature °C 6 to 32 6 to 32 Operating range, humidity % RH 40 to 100 40 to 100 Dehumidification capacity max. l/day At 30 °C/80 % RH l/day 32.9 42.3 At 20 °C/70 % RH... - Page 20 This has given us the reputation of being more than just an excellent, reliable supplier: REMKO, a partner who helps to solve problems. Sales REMKO offers not just a well established sales network both...
Need help?
Do you have a question about the ETF 360 and is the answer not in the manual?
Questions and answers