Subscribe to Our Youtube Channel
Related Manuals for REMKO ETF 360
Summary of Contents for REMKO ETF 360
- Page 1 REMKO ETF 360 / ETF 460 Mobile dehumidifi ers Operation · Technology · Spare parts Edition GB – B01...
-
Page 3: Table Of Contents
These instructions are part of the unit and must always be kept in the direct vicinity of the site of installation or at the unit. Made by REMKO We reserve the right to make changes; no liability for errors and misprints! -
Page 4: Dehumidification
REMKO ETF 360/460 Dehumidification In terms of energy consumption, The interrelated processes dehumidification has one decisive occurring during dehumidification advantage: are based on physical laws. These are illustrated here in simplified form in order to explain Energy expenditure is restricted the principle of dehumidification. - Page 5 90-190 l/ circulates through the REMKO If the temperature falls further, the m³, heavy concrete 140-190 l/m³, dehumidifi er. It is dehumidifi ed capacity to absorb the maximum lime-sand bricks 180-270 l/m³.
-
Page 6: Safety Notices
REMKO ETF 360/460 Heat of condensation Vice versa, energy is released the heat energy is recirculated, during the liquefaction of which is consumed during gas, which is called heat of evaporation and released during The energy transferred from the condensation. -
Page 7: Description Of The Unit
(e.g. Depending on the room air through mould formation) is to be avoided. Schematic diagram showing the mode of operation of the REMKO dehumidifi er Dehumidifi ed The units are also suitable for room air drying and dehumidifi cation of:... -
Page 8: Installation
If the units are to operate ■ continuously with an external condensation connection, the Diagram showing installation of the REMKO dehumidifier respective chapter on page 11 must be observed. nOTE In order to prevent compressor... - Page 9 Electrical connection Control panel Set the humidity The control panel contains all The units operate on 230 V The dehumidifi cation capacity ■ controls and respective indicator AC/50Hz depends solely on the room lights. conditions, room temperature, Electrical connection relative humidity and observance ■...
-
Page 10: Automatic Defrost
REMKO ETF 360/460 activate timer automatic defrost Emptying condensation collector With the timer function, automatic The moisture contained in the “ON/OFF” switching functions room air condenses on cooling and The installed condensation can be preselected up to 24 hours covers the evaporator fins with collector must be emptied from (in a one hour cycle). -
Page 11: Decommissioning
Decommissioning Continuous operation with Continuous operation via the Press the Power button []. external condensation drain internal condensation pump -All indicators and unit functions are now switched off- The units have a condensation For uses at locations with no drain, connection at the rear. -
Page 12: Transporting The Unit
REMKO ETF 360/460 Transporting the unit Care and maintenance For easy and convenient transport, Cleaning the condenser and nOTE the units are provided with four evaporator Regular care and maintenance transport rollers and additional is a basic precondition for a recessed grips. -
Page 13: Troubleshooting
Troubleshooting Filter cleaning The units were manufactured using the latest production methods The unit is provided with an air 5. Carefully clean the air fi lter [F] and tested repeatedly for perfect inlet grille with integrated air fi lter with a soft brush or vacuum function. -
Page 14: Electrical Wiring Diagram
REMKO ETF 360/460 The unit operates, but The unit is noisy or without condensation condensation discharges aTTEnTiOn Check the hygrostat setting Check that the unit is standing ■ ■ All work on the refrigeration The setting must be lower than on a level and firm surface. -
Page 15: Intended Use
Disposal of packaging The units must not be used for any returned the enclosed “warranty other purposes. document” to REMKO GmbH & When disposing of the packaging Co. KG. material, please think of the The units must only be operated environment. -
Page 16: Exploded Drawing
REMKO ETF 360/460 Exploded drawing We reserve the right to make changes to dimensions and the design in the interest of technical advances. -
Page 17: Spare Parts List
Spare parts list Bezeichnung ETF 360 ETF 460 EDP No. EDP No. Base plate 1111850 1111850 Transport roller 1111851 1111851 Compressor, complete 1111852 1111853 Power cord with plug 1111854 1111854 Connection adapter 1111855 1111855 (for condensation pump operation) Condensation hose, running metre... -
Page 18: Maintenance Report
REMKO ETF 360/460 ✍ Maintenance report Unit type: ........Serial number: ........10 11 12 13 14 15 16 17 18 19 20 Unit cleaned - externally - Unit cleaned - internally - Fan impeller cleaned Fan housing cleaned Condenser fins, cleaned... -
Page 19: Technical Data
Technical data Series ETF 360 ETF 460 Operating temperature range °C 6 to 32 6 to 32 % relative Working area humidity 40 to 100 40 to 100 humidity Max. dehumidifi cation capacity l/day at 30°C/80% RH l/day 32.9 42.3 at 20°C/70% RH... - Page 20 This has given us the reputation of being more than just a good, reliable supplier: REMKO, a partner that helps solve problems. Sales REMKO not only has an extensive sales network in Germany and abroad, but also unusually highly qualified sales experts.
Need help?
Do you have a question about the ETF 360 and is the answer not in the manual?
Questions and answers