Subscribe to Our Youtube Channel
Related Manuals for REMKO ETF 320
Summary of Contents for REMKO ETF 320
- Page 1 REMKO ETF 320 Mobile dehumidifiers Operation · Technology · Spare parts Edition GB – I03...
-
Page 3: Table Of Contents
Contents Air dehumidification Safety notes Unit description Set-up Commissioning Shutdown Unit transport Care and maintenance Troubleshooting Electrical wiring diagram Intended use Customer service and guarantee Environmental protection and recycling Exploded view of the unit Spare parts list Maintenance protocol Technical data Carefully read this operating manual prior to commissioning/using the unit! This operating manual is a translation of the German original. -
Page 4: Air Dehumidification
REMKO ETF 320 ir dehumidif ication The correlations occurring when With regard to energy air is dehumidified are based on consumption, air dehumidification physical laws. has one distinct advantage: These are depicted here in graphical form in order to provide... - Page 5 REMKO air dehumidifier. and so relative humidity increases. such as brick 90-190 l/m³, heavy The air is dehumidified and, If the temperature continues to concrete 140-190 l/m³...
-
Page 6: Safety Notes
REMKO ETF 320 The amount of energy from Condensation heat and released for condensation. evaporation heat and condensation When dehumidifying fed air, heat is the same. a larger contribution of heat is The Energy transferred to the air For water, this is:... -
Page 7: Unit Description
The units are used in all locations, reduces the relative humidity connection. where dry air is a must and where economic consequential damage Schematic depiction of the workings of the REMKO air dehumidifier (such as that caused by mould) must be prevented. Dehumidified room air... -
Page 8: Set-Up
Schematic depiction of how to set up the REMKO air dehumidifier of the unit and taking into consideration how the unit is used at its location... -
Page 9: Commissioning
Commissioning Before commissioning the unit Control panel Commissioning the units or if local requirements dictate, the air-inlet grill and air-outlet The hygrostat’s rotary knob and 1. Turn the hygrostat’s grill must be checked for the indicator lights are located on rotary knob contamination. - Page 10 REMKO ETF 320 Adjusting units/moisture Adjusting the discharge Automatic defrost system direction The unit’s dehumidification power The moisture contained in the is entirely dependent on the The dehumidified room air is room air condenses when cooling conditions inside the room, the discharged on the top of the unit.
-
Page 11: Shutdown
Shutdown Emptying the condensate Continuous operation with Turn the hygrostat’s container external condensate outlet rotary knob anticlockwise The integrated condensate The units are equipped with into the container must be emptied from a special connection nozzle on the “OFF” position. time to time. -
Page 12: Unit Transport
REMKO ETF 320 Unit transport Care and maintenance The units are equipped with four Cleaning the condenser and NOTE foot rollers and an additional evaporator Regular care and maintenance handle for easy and convenient is fundamental to a long transport. -
Page 13: Troubleshooting
Troubleshooting Filter cleaning The units are manufactured using state-of-the-art production To prevent damage to the unit, it is 5. Clean the air filter with methods and tested several times equipped with an intake grill with lukewarm water or a vacuum to verify their correct function. -
Page 14: Electrical Wiring Diagram
REMKO ETF 320 The unit runs but condensate The unit is loud or Note on refrigerants is not formed: condensate runs out: The units work with environmentally-friendly Check the room temperature Check whether the unit is on ■ ■ and ozone-neutral R410a... -
Page 15: Intended Use
Our units are carefully packed “Certificate of guarantee” to REMKO GmbH & Co. KG at the and delivered in stable cardboard The units are only permitted time when the units are purchased transport packaging and, to be operated by people and commissioned. -
Page 16: Exploded View Of The Unit
REMKO ETF 320 Exploded view of the unit We reserve the right to modify the dimensions and design as part of the ongoing technical development process. -
Page 17: Spare Parts List
Spare parts list Designation EDP no. Base plate 1111120 Conveyor rollers 1103621 Compressor, cpl. 1111121 Vibration dampers 1111122 Suction pipe 1111123 High pressure line 1111124 Solenoid valve, cpl. 1111823 Centre wall 1111125 Condenser condensate trap (compressor) 1111126 Microswitch bracket 1111127 Microswitch 1103627 Condensate trap... -
Page 18: Maintenance Protocol
REMKO ETF 320 ✍ Maintenance protocol Unit type: ........Unit number: ........10 11 12 13 14 15 16 17 18 19 20 Unit cleaned - outside - Unit cleaned - inside - Fan blade cleaned Fan housing cleaned Condenser cleaned... -
Page 19: Technical Data
Technical data Series ETF 320 Operating range, temperature °C 6 to 32 Operating range, humidity % RH 40 to 100 Dehumidification capacity max. l/day At 30 °C/80 % RH l/day 28.4 At 20 °C/70 % RH l/day 15.2 At 15 °C/60 % RH l/day Max. - Page 20 REMKO, a partner who helps to solve problems. Sales REMKO offers not just a well established sales network both nationally and internationally, but also has exceptionally highly- qualified sales specialists. REMKO employees in the...
Need help?
Do you have a question about the ETF 320 and is the answer not in the manual?
Questions and answers