Chassis Fan; Removing The Chassis Fan - Dell G5 5090 Service Manual

4. Using the alignment post, align the screw hole on the hard-drive assembly with the screw hole on the chassis.
5. Route the power cable and data cable through the routing guides on the hard-drive assembly and connect the cables to the hard
drive.
6. Replace the screw (#6-32) that secures the hard-drive assembly to the chassis.
Next steps
1. Install the left-side cover.
2. Follow the procedure in
Identifier
Status

Chassis fan

Identifier
Status

Removing the chassis fan

Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
3. Remove the light bar.
About this task
The following images indicate the location of the chassis fan and provides a visual representation of the removal procedure.
Steps
1. Lay the computer on the right side.
2. Disconnect the fan cable from the system board.
3. Gently pull the fan to release it from the rubber grommets.
24 Removing and installing components
After working inside your computer.
GUID-55DF0237-E5D4-4AE6-855C-4E8A9733E1EC
Released
GUID-1831E91D-8022-4BAA-9CA1-30B55F1BF67D
Released
Before working inside your computer.