2. Remove the
left-side
cover.
3. Remove the
light
bar.
4. Remove the
front cover
5. Remove the
memory
modules.
6. Remove the
wireless
card.
7. Remove the
solid-state drive/Intel
8. Remove the
graphics
card.
9. Remove the
coin-cell
battery.
10. Remove the
processor fan and heat-sink
11. Remove the processor.
12. Remove the
LED daughter
About this task
Figure 3. System-board components
1. wireless-card slot
2. hard-drive data cable connector (SATA0)
3. hard-drive power cable connector (SATA PWR)
4. coin-cell battery
5. power-supply unit cable connector
6. graphics-card slot
52
Removing and installing components
Optane.
assembly.
board.