Dell G5 5090 Service Manual page 70

Intel Software Guard Extensions
AC Recovery
Enable Intel Speed Shift Technology
Auto On Time
USB Wake Support
Deep Sleep Control
Fan Control Override
Wake on LAN/WLAN
Block sleep
Intel Ready Mode
POST Behavior
Adapter Warnings
Numlock LED
Keyboard Errors
Fastboot
Extend BIOS POST Time
Full Screen Logo
Warnings and Errors
Table 9. System setup options—Virtualization Support menu
Virtualization Support
Virtualization
VT for Direct I/O
Trusted Execution
Table 10. System setup options—Wireless menu
Wireless
Wireless Device Enable
Table 11. System setup options—Maintenance menu
Maintenance
Service Tag
Asset Tag
SERR Messages
Dell development configuration
BIOS Downgrade
Data Wipe
70 System setup
Sets what action the computer takes when power is restored.
Enable or disable Intel Speed Shift Technology.
Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays or Selected Days.
Default: Disabled.
Enable the USB devices to wake the computer from Standby.
Enables you to control the Deep Sleep mode support.
Enable or disable Fan control Override.
Enables the computer to be powered on by special LAN signals.
Enables you to block entering to sleep mode in OS environment.
Enable or disable the Intel Ready Mode.
Enable adapter warnings.
Default: Enabled.
Enables the NumLock function when computer boots.
Enables the keyboard error detection.
Enable to set the speed of the boot process.
Default: Thorough.
Configure additional pre-boot delay.
Enable or disable to display full screen logo.
Sets the boot process to pause when Warnings or Errors are detected.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.
Enable or disable trusted execution.
Enable or disable internal wireless devices.
Display the system's Service Tag.
Create a system Asset Tag.
Enable or disable SERR messages.
Enable or disable Dell development configuration.
Control flashing of the system firmware to previous revisions.
Enable to securely erase data from all internal storage devices.