9. Reinstallation
When re-fitting battery post terminal clamp, torque to be between 2.9 – 7.8 Nm.
-
-
When re-fitting the seat belts, torque the bolts to 42 Nm.
-
When re-fitting the seat, torque the bolts to 37 Nm.
-
Reinstall all temporarily removed parts.
10. Owner's Manual and Caution Label
Place Owner's Manual in the glove box. Hang the Caution Label on the shift lever.
STEP 6. Install the camera bracket using washers,
spring washers and nuts as shown.
IMPORTANT:
When fitting the camera to the bracket, torque the
nuts to 3Nm.
Page 68/68