Rear Camera Connection - Toyota PZQ90-89011 Installation Manual

Rear Camera Connection

8.
For vehicle with 2011 Display Audio (PZQ60-00521, PZQ60-00525) or 2011 AVN (PZQ60-00531,
PZQ60-00535)
For August 2013 production vehicle onward vehicle
For AVN/DADLX
For DA Base
Connect the rear camera 4 pin connector to the back
of the audio unit as shown.
NOTE:
To show the reverse display on the screen, reverse
signal need to be connected using PZQ60-00151
harness.
Using Hilux Camera Patch Wire Harness
(PZQ60-00230), connect the pre-wire rear camera
connector (4pin female) to the 4pin male connector
of the wire harness.
Disconnect the original line fit 24 pin connector
harness and cable tie the connector to the existing
vehicle harness. Please see the 24 pin connector
position on the left audio diagram.
Replace the existing vehicle 24 pin connector with
the Hilux Camera Patch Wire Harness
(PZQ60-00230).
Page 66/68