IMPORTANT SAFETY INSTRUCTIONS • When using your appliance, basic precautions should always be followed, including the following: • Read all instructions before using this product. • This product has been designed for indoor, domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
Page 5
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Page 6
• Close supervision is necessary for any appliance being used by or near children. • Never leave the appliance unattended when it is connected to the mains. Before storing the appliance, once it is unplugged, please wait until it has cooled down (around 1 hour).
Page 7
may result in fire, electric shock or personal injury. • The appliance must be rested on a stable surface. When placing the appliance on its base, ensure that the surface on which the base is placed is stable. • The appliance must not be used if it has been dropped, if there are visible signs of damage or if it is leaking.
Page 8
1. ASSEMBLY Tips for better results with your garment steamer • We recommend checking the garment care label for manufacturer recommendations before steaming. We also recommend testing the garment and effect on the garment on an unobtrusive area such as an inner seam.
Page 9
Extend the pole fully. Close the three locks. Do not attempt to lift up or transport the appliance holding the integrated hanger. Fully insert the hanger vertically on top of the pole. Position the steam head on its cradle.
2. BEFORE USE Remove the water tank. Unscrew the cap then fill the water tank with untreated tap water. 2,5L 84OZ Fully tighten the water tank cap and insert tank back in appliance. Add the garment of your choice on the hanger.
Page 11
3. ACCESSORIES Accessories must be fitted when appliance is cold and not switched on. Warning: Never touch the steam head until it has cooled down completely. The fabric brush opens the weaves of the fabrics for better steam penetration. Attach the fabric brush to the steam head when appliance is unplugged.
Page 12
Position the steam head on its cradle. 4. USE The appliance must be used on a flat, dry, heat and water resistant flooring. The appliance must not be used on very thick carpets or rugs. Plug in the appliance.
Page 13
Press on the ON/OFF pedal and check that light is switching on. Wait for 45 seconds before steaming. After 45 seconds approximately, steam will appear. • Grasp the steam head with the steam vents pointing away from you. • Start steaming by brushing material lightly with the grain of the fabric in an up/down vertical motion.
To release the hanger, unlock the lock system by pulling it up. 360° Lock the hanger by pushing down the lock system. Warning: Never steam a garment while it is being worn. 5. DURING USE If no steam is produced, if a gurgling sound is heard or if water is dripping through the holes of the steam head, raise the steam hose occasionally to remove condensation inside the...
Page 15
Press the On/Off Pedal and check that the light has turned off. Remove the water tank. Unscrew the cap then fill the water tank with untreated tap water. 2,5L 84OZ Fully tighten the water tank cap and insert the water tank back into the appliance.
Press the ON/OFF pedal and check that the light is on. Wait for 45 seconds before steaming. 6. AFTER USE Press the On/Off Pedal and check that light has turned off. Unplug the appliance. Remove the water tank.
Page 17
Unscrew the cap and then empty the water tank completely in a sink. Screw back the cap and place the water tank back in the appliance. Roll up the power cord and place it on its hook. Wait for an hour for your appliance to completely cool down before storing.
7. DESCALING PROCEDURE This process should be made every 6 months or as soon as you feel that the performance of the appliance (steam output) is decreasing. WARNING! Wait for an hour or so until the appliance completely cools down. Remove the water tank.
Page 19
Never fill inside the pole connection. 0.5 L 500ml 17OZ Pour 500 ml of water into the appliance tank inlet. Water Gently shake the appliance. Vertically tilt the appliance to empty water into the sink. Prepare a 1L mix of 500ml of water and 500ml Water Water Water...
Page 20
Wait for 12 hours minimum for best results. Place the appliance over the sink and unscrew the "Anti calc" cap by turning it anti clockwise. Vertically tilt the appliance to empty the liquid into the sink. 0.5 L 500ml 17OZ Pour in 500ml of water into the appliance tank inlet.
Page 21
Vertically tilt the appliance to empty the water into the sink. Replace the anti-calc cap by screwing it in completely to ensure that it is watertight but do not overtighten it. Insert the pole back into the housing and lock it into place.
Page 22
Unscrew the cap then fill the water tank with untreated tap water. 2,5L 84OZ Fully tighten the water tank cap and insert tank back in appliance. Plug in the appliance. Allow it to steam until no water is left in the water tank.
Page 23
8. CLEANING Wait for an hour or so until the appliance has completely cooled down. only use a damp sponge or cloth to clean the base. Only use a damp sponge or cloth to clean the steam head. Never use detergents when cleaning your appliance.
Page 24
Never wash or rinse appliance directly over a sink. Never wash or rinse the steam head directly over a sink.
TROUBLESHOOTING Problems Possible causes Solutions There is no The appliance has not Check that the appliance has been steam. been turned on. plugged in correctly. Next press the On/Off pedal, the power indicator light located at the front of the appliance will come on.
Need help?
Do you have a question about the IT65 Series and is the answer not in the manual?
Questions and answers