TP-Link TL-WR850N User Manual page 56

300mbps wireless n router
Hide thumbs Also See for TL-WR850N:
Table of Contents

Advertisement

Chapter 4
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router's WAN port and synchronize your System Time with internet.
The first time you configure the OpenVPN Server, you may need to
Server.
3. Select the
Servive Type
4. Enter a VPN
Service Port
should be between 1024 and 65535.
5. In the
VPN Subnet/Netmask
to the device by the OpenVPN server.
6. Select your
Client Access
remote device to access your home network; select
you also want the remote device to access internet through the VPN Server.
7. Click Save.
8. Click
Generate
to get a new certificate.
Note:
If you have already generated one, please skip this step, or click
9. Click Export to save the OpenVPN configuration file which will be used by the remote
device to access your router.
Step 2 Configure OpenVPN Connection on Your Remote Device
(communication protocol) for OpenVPN Server: UDP, TCP.
to which a VPN device connects, and the port number
fields, enter the range of IP addresses that can be leased
type. Select
Home Network Only
Configure the Router in Wireless Router Mode
Generate
a certificate before you enable the VPN
if you only want the
Internet and Home Network
Generate
to update the certificate.
if
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents