Wireless Advanced - TP-Link TL-WR850N User Manual

Chapter 5
Done!
5 4 5

Wireless Advanced

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Wireless
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
5 Delete all or disable all entries if there are any entries already.
6 Click Add New and fill in the blank.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B / 00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select Enabled
4 ) Click Save and click Back.
7 The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Advanced.
Configure the Router in Access Point Mode
in the Status drop-down list.
77