BenQ EW600 User Manual page 38

External Storage Connections
Connecting a flash drive
Connect a USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector to play files
stored on the flash drive.
• If you want to play media from a flash drive while the projector is set to the HDMI or PC input source, you must
first return to the BenQ Launcher interface by pressing the source button
the remote control and then selecting BenQ Launcher.
• A red dot will appear above the USB icon in the Source menu anytime a USB-A flash drive is connected to the
projector.
To play files stored on a flash drive:
1. Connect the USB-A flash drive to the USB-1 or USB-2 port at the rear of the projector.
2. A pop-up notification from the File Manager app will appear indicating that a storage device is
detected. Select All Files and press OK to open the device.
• If you do not want to open the media file immediately after connecting the storage device, press the back button
to remain on the current screen.
• If you are trying to open a media file from a storage device that was already previously connected, select USB in
the Source menu, press OK, and select All Files.
38 Operation (under Launcher source)
or the LAUNCHER button on