Siemens Milltronics ILE-37 Application Manual page 5

Step Two: Secure Inner Diaphragm Ring
1. Line up the holes of the inner diaphragm ring with
the holes of diaphragm and the holes on the ILE-37
body.
Step Three: Replace LVDT Conditioner Card
1. Place metal spacers vertically over the screw holes.
2. Line up holes on LVDT conditioner card with the
holes of the spacers.
CAUTION: Do not touch circuitry on LVDT conditioner card
Milltronics ILE-37 Sensing Head Diaphragm Replacement
2. Replace the four screws that connect the inner
diaphragm ring to the ILE-37 body.
3. Use 5 mm Allen Key to firmly tighten the four
screws.
3. Replace the two nylon washers over the holes on
the LVDT conditioner card.
4. Use 2.5 mm Allen key to replace the two screws.
AG050425
APPLICATION GUIDE
5 of 7