Siemens Milltronics ILE-37 Application Manual page 4

Step Six: Remove Diaphragm
1. Gently pinch the diaphragm on sensing head side.
Part Two: Replace Diaphragm
Step One: Insert New Diaphragm
1. Place the new diaphragm around the sensing head
shaft socket and push through to the opposite side.
Milltronics ILE-37 Sensing Head Diaphragm Replacement
2. Pull the diaphragm outward to remove.
2. Adjust the position of the new diaphragm, so that it
is flat against the ILE-37 body.
3. Line up the holes of the new diaphragm with the
holes on the ILE-37 body.
AG050425
APPLICATION GUIDE
4 of 7